glass facades
They are wall curtains of glass and aluminum that give a distinctive visual vision that is highly designed to withstand all conditions
Cardboard interfaces Curtain Wall
Aluminum profiles are used for large facades of exhibitions, malls, or even villas. It is made of aluminum profiles, the depth of the segment with glass ranges from 13 cm to 24 cm, according to the height of the façade and the structural calculations for this façade. This section consists of an internal aluminum cover for an external cover, and glass is between the internal and external sections.
The glass used for this section is double sided with a thickness of 24 mm, consisting of 6 mm of glass, 12 voids, and 6 mm of glass.
Dry System
In this type, the glass shutters for the façades are made of aluminum on which glass is installed without the use of silicone between the spacers
Structure Glazing facades
Aluminum sections are used for large facades of exhibitions, malls, or even villas, according to the customer’s desire or the site’s condition. It is composed of aluminum sections, the depth of the section with the glass ranges from 9 cm to 24 cm, according to the height of the façade and the structural calculations for this façade. This section consists of aluminum from the inside only, and from the outside, the glass appears without any aluminum sections, and the glass is between the internal and external sections.
It consists of 6 mm glass, 12 voids, and 6 mm glass
Wet System
For this type, the glass shutters for the facades are glass only, which is installed on aluminum profiles, with the use of silicone between the glass joints. (The silicone used between the glass joints is Structural Silicone
Frameless interfaces
It is a composite glass facade of 12 mm thick glass divided with a stainless steel frame installed around the opening, and this type comes on more than one layer according to the height of the facade, and it can reach 10 layers with the use of glass supports that are calculated structurally to bear the weight of the glass and wind pressure
Frameless Spyder interfaces
They are facades made of single 12 mm or double 24 mm glass with a thickness of 6 mm glass + 12 mm space + 12 mm of tempered glass. This type is mounted on a special spider accessory to collect the glass together.
With back supports to give high strength and a wonderful aesthetic shape.
